Please read the following steps carefully before attempting to remove any existing windows. Important – Check that the internal width and height are larger than external. (*Providing there is sufficient clearance to do so.) Measure between the external brickwork opening and add 40mm to the width and 20mm* to the height with equal 20mm* sitting behind the brick. The full width of the brick is visible on the outside. Measure between the external brickwork opening and deduct 10mm both in width and height You will see about 20-40mm of visible brick showing on the outside. Both methods are explained in more detail below. There are mainly two different ways in which the windows will be originally installed brick to brick or check reveal. You will firstly need to measure the opening in the brickwork to ensure the windows you have bought will fit. Silicone gun with silicone to match the external frame finish.You will require the following tools and equipment before beginning: Many window suppliers including Quickslide offer an installation service should you not feeling confident in doing so.Īpproximate completion time per window: 1-2 hours for a new build and 2-3 hours to remove an existing window and replace with a new one. The installation of any window is a complex job that most people without some experience of building and joinery may have difficulty in doing and so shouldn’t be taken lightly.
Additionally, you can find out more about what building regulations effect window and door installations here. If you have not yet bought your windows you may also first want to review our window and door buying guides.
Corinthian quickslide installation how to#
This guide will show you step-by-step how to install PVCu Sliding Sash Windows.
0 kommentar(er)
